Construction and investigation of multi-enzyme immobilized matrix for the production of HFCS.

Enzymes are biological molecules that act as catalysts and speed up the biochemical reactions. The world's biotechnological ventures are development of enzyme productiveness, and advancement of novel techniques for thriving their shelf existence. Nowadays, the most burning questions in enzyme technology are how to improve the enzyme productivity and reuse them. The immobilization of enzymes provides an excellent scope to reuse the enzymes several times to increase productivity. The main aim of the present study is the establishment of an immobilized multi-enzyme bio-system engineering process for the production of High-fructose corn syrup (HFCS) with an industrial focus. In this study, multi-enzyme such as α-amylase, glucoamylase and glucose isomerase were immobilized in various support matrices like sodium alginate, sawdust, sugarcane bagasse, rice bran and combination of alginate with cellulosic materials. The activities of the immobilized multi-enzyme system for the production of HFCS from the starch solution were determined. The multi-enzyme immobilized in sodium alginate shows better fructose conversion than free enzyme. Among the support matrices, multi-enzyme immobilized in sawdust produced total 80.74 mg/mL of fructose from starch solution and it was able to be used in several production cycles. On the other hand, multi-enzyme immobilized in combination of sodium alginate and sawdust produced the maximum amount of fructose (total 84.82 mg/mL). The free enzyme produced 17.25 mg/mL of fructose from the starch solution in only a single cycle. In this study a new fixed bed immobilized multi-enzyme bioreactor system was developed for the production of HFCS directly from starch. This finding will create a new opportunity for the application of immobilized multi-enzyme systems in many sectors of industrial biotechnology.

Computational designing of a novel subunit vaccine for human cytomegalovirus by employing the immunoinformatics framework.

Human cytomegalovirus (HCMV) is a widespread virus that can cause serious and irreversible neurological damage in newborns and even death in children who do not have the access to much-needed medications. While some vaccines and drugs are found to be effective against HCMV, their extended use has given rise to dose-limiting toxicities and the development of drug-resistant mutants among patients. Despite half a century's worth of research, the lack of a licensed HCMV vaccine heightens the need to develop newer antiviral therapies and vaccine candidates with improved effectiveness and reduced side effects. In this study, the immunoinformatics approach was utilized to design a potential polyvalent epitope-based vaccine effective against the four virulent strains of HCMV. The vaccine was constructed using seven CD8+ cytotoxic T lymphocytes epitopes, nine CD4+ helper T lymphocyte epitopes, and twelve linear B-cell lymphocyte epitopes that were predicted to be antigenic, non-allergenic, non-toxic, fully conserved, and non-human homologous. Subsequently, molecular docking study, protein-protein interaction analysis, molecular dynamics simulation (including the root mean square fluctuation (RMSF) and root mean square deviation (RMSD)), and immune simulation study rendered promising results assuring the vaccine to be stable, safe, and effective. Finally, in silico cloning was conducted to develop an efficient mass production strategy of the vaccine. However, further in vitro and in vivo research studies on the proposed vaccine are required to confirm its safety and efficacy.Communicated by Ramaswamy H. Sarma.

Identification of the prognostic and therapeutic values of cyclin E1 (CCNE1) gene expression in Lung Adenocarcinoma and Lung Squamous Cell Carcinoma: A database mining approach.

Cyclin E1 (CCNE1) is a protein-coding gene that belongs to the Cyclin family of genes which controls the G1/S phase transition of the cell cycle. Previously, its abnormal expression pattern has been examined and found to be correlated with ovarian and breast cancer progression. Herein, we exploited a bioinformatics and database mining strategy to unveil the therapeutic and prognostic significance of CCNE1 gene expression in Lung Adenocarcinoma (LUAD) and Lung Squamous Cell Carcinoma (LUSC). CCNE1 gene was reported to be highly expressed in LUAD and LUSC tissues. Its promoter and coding sequences were reported to be aberrantly methylated in LUAD and LUSC tissues than in normal tissues. Moreover, around 12 somatic mutations (frequency: 0.7%) were recorded in the CCNE1 coding region from different studies involving LUAD and LUSC patients' whole genome sequences. The CCNE1 gene expression was also correlated with LUAD and LUSC patients' overall and disease-specific survival. Immune infiltration analysis revealed the association between CCNE1 gene expression and the abundance of numerous immune cells (i.e., T cells and B Cells) infiltration in LUAD and LUSC patients. Two previously known genes involved in oncogenic processes i.e., CDC45 and PDCD5 were identified as the most highly co-expressed genes of CCNE1 in LUAD and LUSC tissues. Altogether, the CCNE1 gene and its transcriptional and translational products may serve as a prognostic or therapeutic target in the diagnosis and treatment of LUAD and LUSC patients. The scientific findings of this study should assist in translating CCNE1 into clinical practice for lung cancer diagnosis and treatment.

Immunoinformatics-guided designing and in silico analysis of epitope-based polyvalent vaccines against multiple strains of human coronavirus (HCoV).

OBJECTIVES: The group of human coronaviruses (HCoVs) consists of some highly pathogenic viruses that have caused several outbreaks in the past. The newly emerged strain of HCoV, the SARS-CoV-2 is responsible for the recent global pandemic that has already caused the death of hundreds of thousands of people due to the lack of effective therapeutic options. METHODS: In this study, immunoinformatics methods were used to design epitope-based polyvalent vaccines which are expected to be effective against four different pathogenic strains of HCoV i.e., HCoV-OC43, HCoV-SARS, HCoV-MERS, and SARS-CoV-2. RESULTS: The constructed vaccines consist of highly antigenic, non-allergenic, nontoxic, conserved, and non-homologous T-cell and B-cell epitopes from all the four viral strains. Therefore, they should be able to provide strong protection against all these strains. Protein-protein docking was performed to predict the best vaccine construct. Later, the MD simulation and immune simulation of the best vaccine construct also predicted satisfactory results. Finally, in silico cloning was performed to develop a mass production strategy of the vaccine. CONCLUSION: If satisfactory results are achieved in further in vivo and in vitro studies, then the vaccines designed in this study might be effective as preventative measures against the selected HCoV strains.

Improvement of production of lipopeptide antibiotic iturin A using fish protein.

To enhance the production of lipopeptide antibiotic iturin A, nutrient contents of the culture mediums were investigated in both submerged and biofilm fermentations. As a carbon source maltose and as nitrogen source, fish protein was used. In submerged fermentation maltose uptake was found lower (12%) compared to biofilm fermentation (15%) that was associated with higher cellular growth in biofilm. However, requirement of nitrogen (fish protein) concentration was found similar in both submerged and biofilm fermentations. Production of iturin A in submerged fermentation with 12% maltose and 5% fish protein was 4450 mg/L, and in biofilm fermentation it was 5050 mg/L when 15% maltose and 5% fish protein was used.

Production of surfactin using pentose carbohydrate by Bacillus subtilis.

Interest in microbial surfactants has been steadily increasing in recent years due to their diversity, mass production possibility, selectivity, performance under extreme conditions and potential applications in environmental protection. In this study two pentose sugars (xylose and arabinose) were investigated for the submerged fermentation (SmF) of Bacillus subtilis in surfactant production medium for bio-surfactant surfactin production. An excellent vegetative growth of B. subtilis (× 10(10) CFU/mL) was observed for xylose and arabinose containing medium which were comparable to glucose supplemented medium. Low growth (× 10(8) CFU/mL) was found when medium was not supplemented with any of the sugars. Surfactin production in xylose, arabinose and glucose containing medium was 2700, 2600 and 2000 mg/L, respectively, whereas, medium without any sugar showed low surfactin (700 mg/L) production. These results clearly indicate the effect of pentose sugars on production of surfactin. Gradual depletion of the xylose and arabinose were confirmed by HPLC analysis during the growth phase of the strain that ultimately produced the surfactin.

Atomic force microscopy for cellular level manipulation: imaging intracellular structures and DNA delivery through a membrane hole.

The atomic force microscope (AFM) is a versatile tool for imaging, force measurement and manipulation of proteins, DNA, and living cells basically at the single molecular level. In the cellular level manipulation, extraction, and identification of mRNA's from defined loci of a cell, insertion of plasmid DNA and pulling of membrane proteins, for example, have been reported. In this study, AFM was used to create holes at defined loci on the cell membrane for the investigation of viability of the cells after hole creation, visualization of intracellular structure through the hole and for targeted gene delivery into living cells. To create large holes with an approximate diameter of 5-10 microm, a phospholipase A(2) coated bead was added to the AFM cantilever and the bead was allowed to touch the cell surface for approximately 5-10 min. The evidence of hole creation was obtained mainly from fluorescent image of Vybrant DiO labeled cell before and after the contact with the bead and the AFM imaging of the contact area. In parallel, cells with a hole were imaged by AFM to reveal intracellular structures such as filamentous structures presumably actin fibers and mitochondria which were identified with fluorescent labeling with rhodamine 123. Targeted gene delivery was also attempted by inserting an AFM probe that was coated with the Monster Green Fluorescent Protein phMGFP Vector for transfection of the cell. Following targeted transfection, the gene expression of green fluorescent protein (GFP) was observed and confirmed by the fluorescence microscope.

Biofilm formation and lipopeptide antibiotic iturin A production in different peptone media.

Biofilm fermentation is a newly developed promising technique in fermentation technology. In this study no.3 and no.3S media have been used for the lipopeptide antibiotic iturin A production by Bacillus subtilis RB14. The main component of no.3 and no.3S media is Polypepton and Polypepton S, respectively. B. subtilis RB14 produces thick stable biofilm and high amount of iturin A in no.3S medium. Whereas, impaired biofilm formation and lower iturin A production was observed in no.3 medium. From the analytical information it was observed that the amounts of metal ions, such as K(+), Ca(2+) and Mn(2+), cysteine and cellulose are lower in Polypepton compared to the Polypepton S. To investigate their effect on biofilm formation and iturin A production cysteine, cellulose, K(+), Ca(2+) and Mn(2+) were added respectively into the no.3 medium at similar amount that Polypepton S contains. It was observed that individual addition of K(+), Ca(2+), cysteine and cellulose had no effect on biofilm formation, cellular growth induction or iturin A production. However, when Mn(2+) was supplemented in no.3 medium, biofilm development was restored with an improved production of iturin A. Finally, combined addition of investigated substances into the no.3 medium resulted with highly folded, thick biofilm with high cellular growth and iturin A production compared to the original no.3 medium.